04861661AA Electronic Throttle Body Assembly with IAC TPS Replacement for Jeep Wrangler Chrysler Pacifica V6 3.8L Jeep Grand Cherokee Commander Dodge Ram 1500 Dakota Nitro V6 3.7L Replace 04861661AB

Instruction

Remove the air cleaner and duct hose with a screwdriver.Disconnect the electrical connector on the MAF by pulling out the plug. Disconnect the intake air temperature sensor in the air duct.

Disconnect the idle air control on the side of the throttle body by pulling the electrical connector. Disconnect the throttle position sensor opposite the throttle cable levers.

Disconnect the throttle cables by turning the throttle lever on the throttle body all the way open by hand and removing the now slackened cables from the throttle lever. Remove the heated water hoses from the bottom of the throttle body if there are any.

Use a needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Remove the bolts running through the throttle body and into the intake manifold.

Use inch drive socket and ratchet, lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body in reverse order

Fitment/Compatibility:

• 2007 Chrysler Pacifica V6 3.8L Throttle Body
• 2007 2008 2009 2010 2011 Dodge Dakota V6 3.7L Throttle Body
• 2007 2008 2009 Dodge Durango V6 3.7L Throttle Body
• 2007 2008 2009 2010 2011 Dodge Nitro V6 3.7L Throttle Body
• 2007 2008 2009 2010 Dodge Ram 1500 V6 3.7L Throttle Body
• 2007 2008 2009 2010 Jeep Commander V6 3.7L Throttle Body
• 2007 2008 2009 2010 Jeep Grand Cherokee V6 3.7L Throttle Body
• 2007 2008 2009 2010 2011 2012 Jeep Liberty V6 3.7L Throttle Body
• 2007 Jeep Wrangler V6 3.8L Throttle Body
• 2011 Ram Dakota V6 3.7L Throttle Body
• 2011 2012 Ram 1500 V6 3.7L Throttle Body