APPLIED MEMBRANES INC. 100 GPD Reverse Osmosis Membrane | RO Membrane Water Filter Replacement for Reverse Osmosis Water Filtration System | 1.8” x 12” Universal Compatibility | Made in USA
Product Description
APPLIED MEMBRANES INC. 100 GPD Reverse Osmosis Membrane | RO Membrane Water Filter Replacement for Reverse Osmosis Water Filtration System | 1.8” x 12” Universal Compatibility | Made in USA
- The PUREST water – Removes up to 99.9% of impurities icnluding Heavy Metals, Total Dissolved Solids (TDS). Certified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.
AMI Residential RO Membranes produce high quality water and are designed for use in Home RO Systems. These elements are constructed of DOW RO Flat Sheet, are NSF/ANSI Standard 58 listed and are made in the USA in our ISO 9001:2008 Certified manufacturing plant.
€ 100% Quality Check and Integrity Tested
€ Fits all Standard 2"x12" Home RO Membrane Housings
€ High Quality RO Membranes with Consistent Performance
€ Large Stock for Quick Delivery
€ Made in the USA using DOW RO Flat Sheet Membrane
Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. Since 1983, Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance.
This element can be used as replacements in Home RO Systems, and is a direct substitution for the below models:
€ Kent RO 100 TFC
€ Kent RO 120 Hi-S
€ Kent RO 200 Hi-F
€ Osmotik T112-100
€ RO UltraTec TF-1812-100
Operating Conditions:
Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.
€ Maximum operation pressure: 125 psi (0.86 MPa)
€ Maximum feed flow rate: 2 gpm
€ Maximum operating temperature: 113° F (45° C)
€ Maximum feed water turbidity: 1 NTU
€ Maximum feed water SDI (15min): 5
€ Chlorine tolerance: 0
€ Feedwater pH range: 2-11
€ Minimum brine flow to permeate flow ratio: 4:1
