TowerTop 2/10/25 Amp 12V Smart Car Battery Charger, Fully

TowerTop 2/10/25 Amp 12V Smart Car Battery Charger, Fully Automatic Battery Maintainer with Engine Start, Auto Desulfator, Battery Repair, Winter Mode, for AGM, STD, Gel, Deep Cycle Batteries
- Efficient, Energy-Saving, and Fast Charging: The TowerTop 12v battery charger offers 4 adjustable current settings (2A/10A/25A/AUTO) to meet your diverse needs. With a max charging current of 25A, you can fully charge a 100Ah battery in under 3.5 hours. Achieving an 85% charging efficiency (industry average 75%), this battery chargers is more efficient, increasing charging speed by 1640% compared to 2A car battery charger. Not only is it energy-efficient, but it also saves you a lot of wait time
- Fully Automatic Charging for Convenience and Safety: This 12 volt battery charger automatically detects battery status and starts charging automatically within 30 seconds if you forget to press Start. After a full charge, it enters pulse repair mode, turns off the screen to save energy, and maintains a safe voltage for long-term storage. If voltage drops, it restores full power. The smart battery charger also remembers your last settings, ensuring seamless operation even after a power outage
- All-in-One Compatible Design: Designed for 12V sealed lead-acid batteries in cars, boats, RVs, power sports, and deep-cycle batteries, including 12V STD, AGM, GEL, Wet, MF, EFB, calcium and deep-cycle batteries
- HD LCD Screen and 8-Stage Intelligent Charging: With true 8-stage smart charging (desulfurization, soft start, bulk charge, absorption, analysis, repair, float, and pulse maintenance), it optimizes battery life and repairs batteries without overcharging or damaging them. The HD LCD screen allows you to view the charging stage and parameters at any time rather than leaving you guessing, keeping you informed of the charging status
- Battery Repair: Independent desulfurization and repair buttons allow you to manually desulfurize and repair your battery to restore lost battery performance, helping to revive old/idle batteries and extend battery life. If your battery cannot be charged, you can try the "repair" mode to fix it. Note: It cannot repair completely drained batteries
- Engine Start & Winter Mode: Engine start delivers 100A current helps activating your car battery to start your vehicle in 100 seconds. Winter Mode, +0.2v on the basis of the original charging voltage, better boosts your battery activity and charges more thoroughly in low-temperature situations
- Multi Safety Protection & ETL Certification: The charger provides multiple protections to ensure safe use, including spark-proof, reverse polarity, overcharge/discharge, overvoltage, overcurrent, overload, overheating, current backflow, short circuit, etc. The upgraded cooling system improves performance. ETL certification makes it safe to use
Towertop Smart Battery Charger/Maintainer
- Charges 12 Volt Lead Acid batteries including Standard, AGM, GEL, and Sealed Lead Acid.
- LCD screen displays charging status and battery status with easy to understand icons.
- Start Aid function can optimize the power of your battery in only 120 Second, giving you enough power to start most cars.
- Warning: For 12V battery only, not to be used with 24V battery. Do not charge a frozen or dead battery that has gone below 3V.

7-STAGE CHARGING
1. Desulphation: Pulse charges the battery to break down the build-up of lead sulphate crystals. Lead sulphate crystals can occur
when a battery has been discharged or left unused for a period of time, seriously affecting the performance and lifespan of the battery.
2. Soft Start: A slow steady buildup of the charging process that limits the power supplied to protect the battery.
3. Bulk Charge: The main part of the charging process where 80% of the charge is applied.
4. Absorption: Fully charges the battery by slowly reducing the charge rate to allow the battery to absorb more power.
5. Battery Test: An automatic test to determine the battery condition after charging. If further charging is required, the Recondition stage is selected. If fully charged, the battery goes into Float status.
6. Recondition: Unique charge state to recover deeply discharged batteries.
7. Float: Maintains the battery at 100% charge without overcharging or damaging the battery, allowing the Smart Charger to be left connected to the battery indefinitely.

Specification:
Rated input voltage: 120V AC/60Hz
Input current: 6A
Rated output voltage: 12V DC
Working temperature: 32Â°F (0Â°C) - 104Â°F (40Â°C)

Package includes:
1 x Battery Charger
1 x DC Output Cable with Clip Connectors
1 x User Manual
Country USA
Brand TowerTop
Manufacturer TowerTop
Binding Electronics
ItemPartNumber TP108MB
Model TP108MB
Warranty 18-month warranty
Color 25A
UPCs 712396063414
EANs 0712396063414
ReleaseDate 0000-00-00

Country	USA
Brand	TowerTop
Manufacturer	TowerTop
Binding	Electronics
ItemPartNumber	TP108MB
Model	TP108MB
Warranty	18-month warranty
Color	25A
UPCs	712396063414
EANs	0712396063414
ReleaseDate	0000-00-00

TowerTop 2/10/25 Amp 12V Smart Car Battery Charger, Fully Automatic Battery Maintainer with Engine Start, Auto Desulfator, Battery Repair, Winter Mode, for AGM, STD, Gel, Deep Cycle Batteries

You might also like...