PoE Texas 4 Port PoE/PoE+ Injector with 56V 60W Power Supply - Gigabit Injector - Active Mode A Power Over Ethernet Multi Port PoE Adapter - Supports 4 PoE (802.3af or at) up to 60 watts
Product Description
PoE Texas 4 Port PoE/PoE+ Injector with 56V 60W Power Supply - Gigabit Injector - Active Mode A Power Over Ethernet Multi Port PoE Adapter - Supports 4 PoE (802.3af or at) up to 60 watts
- Simplify installations with a multi port PoE injector/adapter. Use Power over Ethernet (PoE) to power up to 4 IP cameras, desktop phones, or WiFi Access Points. Use with 56 volt high-powered Access Points, PTZ cameras. and other 802.3af or 802.3at PoE devices.
- Active PoE means the right power at the right time. An active PoE/PoE+ injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices.
- Includes a 56v 60w power supply for high-powered devices. Fully IEEE 802.3at compliant; works with Cisco products. Mode A power delivery on pins 1,2(-) 3,6(+).
- Plug and play. Wall mountable. This Gigabit injector offers 10/100/1000 Mbps data, delivering lightning fast wired speeds with no loss of signal quality via 4 Data In ports and 4 Data + Power out ports, to devices up to 328 feet away.
- All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
Mix 10/100 and gigabit data rate and power on the same cable
For 4 devices with 60 watts total power
Power 802.3at devices
4 data in, 4 Data + PoE out
This is not a switch - use it to add PoE to any switch or router
Extend power to 328 ft or 100 meters
Power is off until a compatible device is connected
Power supply included
56 volts DC, 1.1 amps, 60 watts
110 to 220 volt AC operation
90% efficient
UL, DoE, CE and FCC listed
Description
These devices provide power and data in the same Ethernet cable using pins 1,2 and 3,6. Devices receive the 56v only if needed - total of all devices is 60 watts. Check device specs for power needs, it is under 4 watts for most Phones, other devices need up to 25 watts, add up the total for this 60 watt kit, 120 watts also available.
WiFi Access points like Cisco, Meraki, Aruba 802.11ac
IP Cameras like Hikvision
any 802.3af or 802.3at Device
USB, 5v and 12v , non-poe devices - please see our active splitters
Other products from WiFi-Texas
see also our 10/100 and rackmount versions and switches
WT-AF-8-56v120w for more ports
WT-GPOE-4-48v48w with 4 ports always on and lower cost
WS-GPOES-8-7-48v60w with integrated switch
WS-POE-8-48v60w for 10/100 speed data
WS-GPOE-16-48v120w for more ports
WS-POE-12-48v120w for 10/100 speeds and high power
WS-PoE-Tester to display power used by a device
WT-AF 5 and 12 volt splitters
Full details and data sheet at https://www.poetexas.com/
Technical Specifications
You might also like
Pass-Thru Modular Wire Crimper, All-in-One Tool Cuts, Strips, Crimps, Fast and Reliable Klein Tools VDV226-110
Ubiquiti US-24 Unifi Switch
Ubiquiti Networks 2,4/5Ghz 450/1300Mbps 122m 5Pk Indoor/Outdoor, UAP-AC-PRO_5 (Indoor/Outdoor 196.7 x 35 mm)
Cat6 Outdoor, Shielded FTP, 1000ft, Waterproof, Direct Burial Rated CMX, 23AWG Solid Bare Copper, 550MHz, ETL Listed, Bulk Ethernet Cable, trueCABLE
TRENDnet Gigabit Power Over Ethernet Injector, Full Duplex Gigabit Speed Supported, Network Poe Devices Up to 100 M (328 ft.), 15.4 Watts, Auto-Mdix in/Out, Plug & Play, TPE-113GI
BV-Tech 4 Port PoE+ Switch with 2 Ethernet Uplink and Extend Function - 60W - 802.3at + 1 High Power PoE Port
Ubiquiti UniFi Switch - 24 Ports Managed (US-24-250W)
UNIFI Switch 8PORT 150W
Ubiquiti US-8 Unifi Switch
Leviton 42777-1WA Surface Mount Backbox, Single Gang, White, 1.89"