ATR Tile Leveling Alignment System DIY Kit 2mm Cross Floors and Walls (301 pieces)

ATR Tile Leveling Alignment System DIY Kit - 2mm (3/32") Cross

Floors and Walls

Kit Include: 100 Cross Spacers 100 Edge Spacers 100 (ReUsable) Spindle 1 - 10mm Socket

ATR Tile Leveling is a 2 Part System

While every other system require 360 units for 100 pieces of tile, ATR require only 117.

You only need 1 cross spacing plate for 4 tile NOT 4 Clips like every other Leveling System.

Example of the difference between ATR to others leveling system - for 100 pieces of tile project ATR used totals of 117 spacers with approximately cost of 29.99 compare to any other leveling system 360 spacers with cost of 44.00. About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 243 pieces.

Advantages of the ATR Tile Leveling:

1. The universal Spindle removes cleanly and easily, without any force applied, eliminating risks of fragmenting tiles or leaving any unwanted obstructions behind

2. ATR Leveling System the only system not to leave any straps or obstructions between the grout joints once the spindle is removed

3. NO SPECIAL TOOLS REQUIRED, for the advanced professional a simple socket and a cordless drill (optional) may be used to install and remove spindles so you are not depending on a broken gun or a single gun on the job site

4. The ATR spacing plates lock the tile into position giving you the most perfect intersection of the tile and straight lines without requiring consistent adjustments

5. Great labor saving 4 to 1 ratio

How to use 3 Easy steps

1. Spread thinset install tile

2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles.

3. Tighten spindle clock wise firmly until all four corners are aligned flush.
* Remove Reusable spindle once tile adhesive is dry.