Aluminum Marine Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 Reusable Bowl Anti Corrosion 10 Micron Filter(Include Four Fittings)

Replaces Mercury 35-60494-1 and Universal.

To replace element:
1.Drain the unit by loosens the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl's sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.
5.Coat filter element's sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.
6.Run engine and check for fuel leakage.

Attention:
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-rings.As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank, Only thing is you have to make sure to get the proper sealant for the threads. For The First time installation, In order to avoid any leaking at the threads. You'd better get some thread paste since the tape might plug the injectors if it were to come loose.
3.Check and replace regularly.

Instructions：
To Drain Water:
1.Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.

Safety Warning:
Periodically check fittings and filter element for leaks.Be careful when changing fuel filter element .Gasoline is extremely flammable and highly explosive under certain conditions.Avoid spilling gasoline.Always stop engine and do not smoke or allow open flames in the area while changing filter element.