BYSOL AH1531 Replacement Rapid Reload Plus Trimmer Head (Anti-Clockwise) for EGO 15-Inch String Trimmer Models ST1534/STA1500/STA1500-FC/MST1501/MHC1502/ST1530/ST1530-FC.
R 1,050
or 4 x payments of R262.50 with
Availability: Currently in Stock
Delivery: 10-20 working days
BYSOL AH1531 Replacement Rapid Reload Plus Trimmer Head (Anti-Clockwise) for EGO 15-Inch String Trimmer Models ST1534/STA1500/STA1500-FC/MST1501/MHC1502/ST1530/ST1530-FC.
COMPATIBILITY: This replacement string trimmer head is exclusively compatible with EGO multi-tool string trimmer attachment STA1500/STA1500-FC and EGO rear motor string trimmer ST1530/ST1530-FC.
WARNING: If the head loosens after it is fixed in position, replace it immediately. Never use a trimmer with a loose cutting attachment. Replace a cracked, damaged or worn out cutting head immediately, even if damage is limited to superficial cracks. Such attachments may shatter at high speed and cause serious injury.
NOTICE: Always use the recommended nylon cutting line with a diameter that does not exceed 0.095 in. (2.4 mm). Using line other than that specified may cause the string trimmer to overheat or become damaged.
WARNING: Always remove the battery pack from the product when you are assembling parts, making adjustments, cleaning, or when the product is not in use. Never use metal-reinforced line, wire, or rope, etc. These can break off and become
LINE REPLACEMENT:1. Cut one piece of cutting line 16 ft. (5m) long. Insert the line into the eyelet. Push the line until the end of the line comes out of the other side of the trimmer head. Pull the line from the other side until equal amounts of line appear on both sides . 2. Press, while rotating the lower cover assembly in the direction indicated by the arrow, to wind the cutting line into the spool that is inside until approximately 5.5in. (14cm) of line is showing on each side .