Basic Combustion Analyzer by Forensics | Flue Gas Analyzer

Basic Combustion Analyzer by Forensics | Flue Gas Analyzer | CO and O2 Sensor | COAF & EA | Water Trap, Particle and NOx Filters | USB Recharge | USA NIST Calibration |
- ⚛️ RESIDENTIAL: Perfect for residential combustion and ambient air quality analysis or probe / continuous sampling in confined or toxic spaces. Comes FACTORY-CALIBRATED. Turn ON and GO.
- 🌇 ACCESSORIES: Comes with a quality water trap, particle filter, and NOx filter to reduce cross-sensitivity errors.
- 🔬 SENSORS: High-quality electrochemical sensors with oxygen (O2) and carbon monoxide (CO). Calculates CO air free (COAF) and excess air (EA) for combustion analysis. Comes factory-calibrated. Detection error better than ≤±5% F.S. and response time: T < 60 sec. Zero and span calibration options for full control.
- 💪 STRONG: Robust design constructed with ABS and anti-slip grip rubber. Comes with a strong magnet for appliance mounting. Water-resistant, dust-proof, and explosion-proof.
- 🕵️ TRUSTWORTHY: Arrives with calibration and QA certificates ** Product tested and verified in the USA **
A basic and affordable Residential Combustion Analyzer + Handheld Pump with high quality O2 and CO sensors made in the UK. We developed this unit for HVAC professionals, contractors or maintenance engineers for residential boilers, heaters or furnaces. The display screen shows CO, O2, COAF (CO air-free) and EA (Excess Air %). The detector can also be used as a ambient detector for general air quality measurements or can be plugged up to the hand pump to function as spot detector or Combustion and Flue Gas Analyzer. Please note, this analyzer does NOT detect flue temperature nor calculate combustion efficiency. Simple large LCD and with backlight. Product comes with Aluminum hard case, Analyzer containing CO and O2 sensors with a strong niobium magnets for mounting on appliances while testing, Electronic Pump with Stainless Probe, Hose assembly with 3 feet of high temp silicone tubing, Water trap, particle and NOx filters with sensor cap, Screw to mount sensor cap to the Analyzer, USB Charging cable, USB Charger, Calibration Certificate, Clear English Manual & Instructions. ANALYZER SPECIFICATIONS: The detector incorporates electrochemical sensor with Oxygen (O2) 0-30% with 0.1% resolution and Carbon Monoxide (CO) 0-999 with 1ppm resolution. Comes factory calibrated. Accuracy: â‰¤Â±5% F.S. Response Time: â‰¤60s. Working environment: 32Fï½ž113F, ï¼œ95%RH (no dew). Power Source: DC3.7V Li-on battery, 2000mAh. Gas Sensor Life: 2 years. Recommended calibration period: Every 6 months. Explosion-proof grade: ATEX certified Ex ib IIa T4. Protection Grade: IP65. Weight: 230g (with battery). Dimensions: 130mmÃ—67mmÃ—30mm (L Ã— W Ã— H). PUMP SPECIFICATIONS: Rechargeable DC3.0V Li battery 1800mAh charged via USB connector. Pump LCD shows ambient temperature, time, date and backlight high resolution LCD is included. Temperature: 32Fï½ž140F. Humidity: <95%RH non-condensing. Voltage: DC3.0V Li battery 1800mAh. Flow rate: 0.5 LPM. Noise: <60dB. Weight: 140g (with battery). Size: 65x30x225mm.
Country USA
Brand FORENSICS DETECTORS FD
Manufacturer Forensics Detectors
ItemPartNumber FF-L2Z8-I7C3
Model FD-4A-FLUE
EANs 7426843521114
ReleaseDate 0000-00-00

Country	USA
Brand	FORENSICS DETECTORS FD
Manufacturer	Forensics Detectors
ItemPartNumber	FF-L2Z8-I7C3
Model	FD-4A-FLUE
EANs	7426843521114
ReleaseDate	0000-00-00

Basic Combustion Analyzer by Forensics | Flue Gas Analyzer | CO and O2 Sensor | COAF & EA | Water Trap, Particle and NOx Filters | USB Recharge | USA NIST Calibration |

Customers who purchased this also purchased....