Chrome Open-gear Guitar Tuners Machine Heads - 6-piece 3 Left

Chrome Open-gear Guitar Tuners Machine Heads - 6-piece 3 Left 3 Right Alignment
- Good-quality open-gear tuners for guitars, cigar box guitars & more
- Intended for 3-Left, 3-Right alignment (both sides of the headstock)
- Chrome finish and light gray/white pearloid knobs with chrome mounting hardware
- Also great for cigar box guitars and other homemade instruments
- PLEASE READ SIZE SPECS BELOW before ordering, to make sure these will work for you!
This is a set of six guitar tuners/machine heads, complete with mounting screws (12) and press-fit chromed plastic bushings (6). There are 3 tuners meant for the left side of the headstock, and 3 meant for the right side - if you need all of them to be on one side of the headstock (called 6-in-a-line), this is not the set for you! The shafts of these tuners are 1/4" in diameter and have holes at the END (not the center). The shafts are just under 1 inch in length and the distance from the plate to the string hole is just over 7/8" (22.5mm). These tuners can be used for repair work, new instrument building, and are especially good for Cigar Box Guitars! Please note that it is important to mount these on the correct side of the headstock, otherwise the gears may slip. Always make sure the brass gear is aligned towards the body of the instrument, and not the top of the headstock, and you'll know you have them on the correct side!
Country USA
Brand C. B. Gitty
Manufacturer C. B. Gitty Crafter Supply
Binding Electronics
ItemPartNumber 4334235527
Model C. -1608
Color Chrome
UPCs 610074050834
EANs 0610074050834
ReleaseDate 0000-00-00

Country	USA
Brand	C. B. Gitty
Manufacturer	C. B. Gitty Crafter Supply
Binding	Electronics
ItemPartNumber	4334235527
Model	C. -1608
Color	Chrome
UPCs	610074050834
EANs	0610074050834
ReleaseDate	0000-00-00

Chrome Open-gear Guitar Tuners Machine Heads - 6-piece 3 Left 3 Right Alignment

You might also like...