DIGITEN LCD Display Water Flow Control Meter Liquid

DIGITEN LCD Display Water Flow Control Meter Liquid Quantitative Controller + G2" 2 inch Water Flow Hall Sensor Meter Flowmeter Control 10-200L/min + DC 12V Power Adapter
- ★【Large LCD Screen & Monitor Flow Rate】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.
- ★【Quantitative Control & Alarm Function】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm.
- ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature.
- ★【Wide Applications】: Swimming pool, water dispenser, coffee machine, drip irrigation system, home brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than water.
- ★【Package Includes & Warranty】: Thread type: BSP, but it can work with NPT thread. The controller will come with G2" flow sensor, temperature sensor(it can measure liquid temperature) and 12VDC power adapter. 12 month warranty!
This DFC15 controller is used to measure and control the flow of liquid, it can control solenoid valve on/off when the flow reaches to setting value. It is suitable for hall effect flow sensor. Large LCD screen can display the flow rate, volume, and the temperature of the liquid.

FEATURES
Water meter: DFC15 can be used to measure the volume of water
Adjustable accuracy: Calibrate the accuracy through adjust the K parameter
Temperature monitor: Come with temperature sensor, it can measure liquid temperature
Easy-to-Read Front-Panel Liquid Crystal Display

TECHNICAL SPECIFICATIONS
For DFC15 Controller:
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC; Output: 12VDC, max 2A
Adapter lead length: 1m
Measuring Accuracy: Â±1%
Output for Solenoid valve: 12VDC, max 5A
Temperature Sensor: 0-125â„ƒ/32-257â„‰, NTC3950, Accuracy: Â±1â„ƒ/Â±1â„‰ thread: M8
Max Total Volume : 999999 G/L
Quantitative Range: 0-9999.99 G/L
Flow Rate Range: 0-9999.99/LPM(GPM)
Cable Length : 1m
Dimensions: 88mmx126mmx30mm
Weight: 200g
Operation Environment: Temperature: 0-50â„ƒ/32-122â„‰; Relative Humidity: <85%

For G2"Flow Sensor:
Flow range:10-200L/min
Allow compression:Water pressure 1.75 Mpa below
Sensor:Hall effect
Cable length:480mm
Max Size:92mm*68mm

Note:
1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.
2, Ensure the solenoid valve and flow sensor direction is the same with water flow.
3, Please use teflon on the thread when requirement, ensure don't leak.
4, The wires can be extended up to 10m.
5, Avoid the water into the controller.

Package includes:
1 x DFC15 controller
1 x G2" flow sensor
1 x Power adapter
1 x Temperature sensor
1 x Manual
Country USA
Brand DIGITEN
Manufacturer DIGITEN
Binding Misc.
ItemPartNumber ZJ-DFC15F1608
Color DFC15+G2" Flow Sensor
Size DFC15+G2" Flow Sensor
UnitCount 4
ReleaseDate 0000-00-00

Country	USA
Brand	DIGITEN
Manufacturer	DIGITEN
Binding	Misc.
ItemPartNumber	ZJ-DFC15F1608
Color	DFC15+G2" Flow Sensor
Size	DFC15+G2" Flow Sensor
UnitCount	4
ReleaseDate	0000-00-00

DIGITEN LCD Display Water Flow Control Meter Liquid Quantitative Controller + G2" 2 inch Water Flow Hall Sensor Meter Flowmeter Control 10-200L/min + DC 12V Power Adapter

You might also like...