ExtAnt™ for BandRich 30P58 External Antenna Adapter

ExtAnt™ for BandRich 30P58 External Antenna Adapter (EXTANT-BDR-30P58)
- The ExtAnt™ is an indispensable adapter needed to connect your BandRich 30P58 to an external antenna to greatly enhance your BandRich 30P58 performance in low-signal situations (external antenna and coaxial cable not included).
- The ExtAnt™ can also be used to connect your BandRich 30P58 to a direct-connect booster/amplifier (but in such case you will need to make sure that such booster/amplifier supports all bands your BandRich 30P58 operates onto). Do not use the ExtAnt™ with wireless boosters/amplifiers/repeaters as a direct connection to such devices may damage both equipments.
- We recommend that before purchasing the ExtAnt™ you verify that your BandRich 30P58 does have an external antenna connector for the WWAN/Cellular signal. Do not purchase the ExtAnt™ unless you see such connector. If your device has a second antenna port for MIMO, then you will need to purchase two of these adapters. If your BandRich 30P58 has a diversity or aux RF feature, then a second adapter is optional.
- The ExtAnt™ operating frequency range is DC-5200 MHz. This external antenna adapter is made for the BandRich 30P58 (SKU EXTANT-BDR-30P58). For MIMO devices, we recommend that you purchase two of these adapters, as a MIMO signal is split into two equal and necessary parts.
- The ExtAnt™ measures approximately 18 x 0.3 x 0.3 inches and weighs 0.1 lbs. One year manufacturer warranty included.
The ExtAntâ„¢ by WirEngÂ® is a top quality, state of the art single external antenna adapter cable for the BandRich 30P58, with low loss gold plated center-pin connectors on both sides. The cable measures between 12 to 18 inches, and connects directly to the BandRich 30P58 on one side, and has an FME Male connector on the other (will match with an FME Female connector for attaching to antennas, direct-connect amplifiers, etc.). For maximum reliability and minimal RF loss, the matching connector to the BandRich 30P58 has a gold-plated center pin, and the same is true for the FME Male connector on the other side. The BandRich 30P58 ExtAntâ„¢ is recommended for adapting a WirEngÂ® antenna or direct-connect amplifier to your BandRich 30P58. We strongly recommend that before purchasing the ExtAntâ„¢ you make sure that your BandRich 30P58 does have an external antenna connector for the WWAN/Cellular bands. Do not purchase the ExtAntâ„¢ unless you see such connector (usually concealed by a small cover, or available by removing the stub antenna if your device has one). If your device has a second antenna port, because of its MIMO feature, then you will need to purchase two of these adapters as in MIMO systems the signal is split into two parts (you will still see a signal increase with one antenna, but almost no performance improvement). If your BandRich 30P58 has a diversity or aux RF feature, then the purchase of a second adapter is recommended, but not required. The ExtAntâ„¢ by WirEngÂ® is made in the USA with domestic and imported components and includes a three-month warranty period.
Country USA
Binding Wireless Phone Accessory
Brand WirEng®
EAN 0022880448833
Label WirEng®
Manufacturer WirEng®
MPN EXTANT-BDR-30P58
PartNumber EXTANT-BDR-30P58
Publisher WirEng®
Studio WirEng®
ReleaseDate 0000-00-00

Country	USA
Binding	Wireless Phone Accessory
Brand	WirEng®
EAN	0022880448833
Label	WirEng®
Manufacturer	WirEng®
MPN	EXTANT-BDR-30P58
PartNumber	EXTANT-BDR-30P58
Publisher	WirEng®
Studio	WirEng®
ReleaseDate	0000-00-00

ExtAnt™ for BandRich 30P58 External Antenna Adapter (EXTANT-BDR-30P58)

Customers who purchased this also purchased....