GIDERWEL Smart Zigbee 3.0 LED Controller RGBWW Work with

GIDERWEL Smart Zigbee 3.0 LED Controller RGBWW Work with ZigBee Hub Bridge,Echo Plus,Tuya Smart Hub for APP/Voice Control RGBCCT RGBW LED Strip Dimming and Color Changing(only Zigbee Controller)
- 💡ZigBee Hub Required:Upgrade to Zigbee 3.0 LED Controller Compatible with Hub Bridge/Echo Plus and Tuya Smart Hub;【✅Note:Confirm that your device supports Zigbee 3.0 before use them.If you can't connect,please reset the controller】
- 💡Alexa Voice control: .✅No gateway Required.the zigbee 3.0 strip controller can be directly connected with Alexa Echo Plus,Echo (4th Gen),Echo Studio,Echo Show (2.Gen),Alexa Voice control change the color and turn on/off,dim/brighten the LED light.（But not work with echo dot)
- 💡Works with Hub APP:Control your LED lights from anywhere;You also can control multiple smart controllers(strip lights) at the same time on 1 app by setting up groups.
- 💡Works with Normal RGBWW( RGB+Cold White+Warm White)6 Wire LED Strip Lights 12/24V DC【Only a Zigbee Controller ✅Not include the Power Adapter and RGBWW LED Strips,need to purchase separately】
- 💡Timer Controlled:You can set the led light to power on with the morning sun,gently waking you,or to turn on and off as you leave or arrive home.For more customer service, please contact us.
Specification:
Input Voltage: DC12V-24V
Out Max Current: 6A/CH
Total Out Current: 15 A
Max. Load Power:180W(12V) / 360W(24V)
Remote Distance:10~15 meters
Connecting mode: common anode
Controled Method:ZIGBEE ZLL
Connection Mode:APP Control.
Material:ABS
Static Power consumption: <1W
Size: L3.54 in*W1.9 in*H0.98 in

Remarks:The Zigbee Strip Controller Works with ZigBee Light Link Hue V2,Lightify Hub,Homee,Smart Friends and Amazon Echo Plus,But this zigbee strip controller don't compatible with Wi-Fi Device of the 2nd Gen Echo dot and the 3nd Gen Echo,They must be Link to the Zigbee Hub (Such as Hue BridgeV2 and Lightify Hub)
Wire Connection:
1. Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable cross-section must be between 0,33 and 2,08mmâŠƒ2;(AWG22-14).
2. Now push down the terminal with a screwdriver and put in the cable.
3. Take the screwdriver away and the cable is connected with the terminal.
Connection with Gateway:
1. Connect the LED Lights to the controller see section "wire connection".
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.
Reset:
1. Switch on your device.
2. Now switch off and on within 2 seconds.
3. Repeat off/on four times.
4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

For RGBW/RGBWW devices you will find two SSIDs. One for white/warmwhite, the other for RGB.
**The Osram Gateway supports only one SSID, with the RGBW/RGBWW device it find only RGB.

Package include:
1 x Zigbee Strip Controller
1 x instruction book
Country USA
Brand GIDERWEL
Manufacturer GIDERWEL
Binding Kitchen
ItemPartNumber RGBCCT
Model ZC05M
Warranty 1.
Color Zigbee 3.0 RGBCCT Controller only
UnitCount 1
UPCs 723172154240
EANs 0723172154240
ReleaseDate 0000-00-00

Country	USA
Brand	GIDERWEL
Manufacturer	GIDERWEL
Binding	Kitchen
ItemPartNumber	RGBCCT
Model	ZC05M
Warranty	1.
Color	Zigbee 3.0 RGBCCT Controller only
UnitCount	1
UPCs	723172154240
EANs	0723172154240
ReleaseDate	0000-00-00

GIDERWEL Smart Zigbee 3.0 LED Controller RGBWW Work with ZigBee Hub Bridge,Echo Plus,Tuya Smart Hub for APP/Voice Control RGBCCT RGBW LED Strip Dimming and Color Changing(only Zigbee Controller)

Customers who purchased this also purchased....