Hieha 3D Rapid Resin LCD UV-Curing Resin 405nm Standard

Hieha 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photosensitive Resin for LCD 3D Printer 500Gram-Clear
- [High Resolution and Precision] HIEHA photopolymer resin can be cured layer by layer by UV high resolution projector to create 3D printing model, ensures high precision of printing model with smooth finish.
- [Rapid Curing and Great Stability] Bottom layer 25-60s, each layer 3-15s recommended. 405nm UV-resin of 3.72%-4.24% volume shrinkage significantly reduce curing time with high fluidity. Great stability and hardness ensures high quality printing and outstanding printing experience.
- [Less Odor and Safe to Use] Leak-proof bottle fully wrapped with a plastic bubble bag and the resin with No pungent odor, it's much safer to use that allows pure artistic model.
- [Easy to Wash] After the model is printed, just clean it with ethanol spray and brush, then put the model in a ventilated and dry place for secondary curing to obtain a perfect model.
- [Wide Applications] The main components of resin are resin monomer and photo initiator, it is a standard resin for LCD / DLP UV Cure 3D Printer. It is widely used in many fields such as industrial parts, garage kits, craftwork design, education, archaeological model, clock and eyeglasses, etc.
Specifications:
Main Material: monomer and photo initiator
Exposure Time: Bottom layer 25-60s, each layer 3-15s recommended
Viscosity: 150-200 Mpa.s (NDJ-8S Rotary viscometer 25â„ƒ)
Absorption Wavelength: 355nm-410nm
Liquid Density: 1.05-1.25g/ cmÂ³
Solid Density: 1.05-1.13g/ cmÂ³
Tensile Strength: 36-62MPa
Elongation: 11-20%
Bending Strength: 50-70MPa
Thermal deformation temperature: 120â„ƒ
Volume shrinkage: 3.72-4.24%
Shaw hardness: 84D

Storage Method:
Please put the product in a dry and ventilated room without corrosive gas, avoid direct sunlight. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 â„ƒ -35 â„ƒ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality.

Matters Need Attention:
1. This product is single-used and cannot be reused.
2. This material can't touch eyes, skin or clothes, and shall not be drunk. Use only in a well-ventilated environment, please pay attention to air circulation and take protective measures. Clean thoroughly after operation.
3. The product is liquid state with slight smell. Please wear a mask when using, so as to avoid inhalation of aerosol and infection.
4. The product should be stored in a sealed container. The product should be sealed in time and placed in a dry and well-ventilated place after using.
5. In case of accidental inhalation or swallowing, do not induce vomiting, and promptly send to the hospital for treatment.
6. In case of accidental contact with skin, wash skin with soap and water or seek medical advice.
7. In case of accidental contact with eyes, open the eyelid immediately, rinse with soapy water and seek medical advice immediately.
Country USA
Brand Hieha
Manufacturer Shenzhen SUMAOPAI Technology Co., Ltd
ItemPartNumber HIEHA-RC500
Color Clear
UPCs 713440833977
EANs 0713440833977
ReleaseDate 0000-00-00

Country	USA
Brand	Hieha
Manufacturer	Shenzhen SUMAOPAI Technology Co., Ltd
ItemPartNumber	HIEHA-RC500
Color	Clear
UPCs	713440833977
EANs	0713440833977
ReleaseDate	0000-00-00

Hieha 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photosensitive Resin for LCD 3D Printer 500Gram-Clear

You might also like...