LRNJ MOTORWORKS HEAVY-DUTY AIR SUSPENSION 1.5 INCHES LIFT LINKS KIT COMPATIBLE WITH LAND ROVER DISCOVERY 3 LR3 & COMPATIBLE WITH DISCOVERY 4 LR4 WITH AIR RIDE SUSPENSION, PART # LRNJ MOTORWORKS#7

LRNJ MOTORWORKS HEAVY-DUTY AIR SUSPENSION 1.5 INCHES LIFT LINKS KIT COMPATIBLE WITH LAND ROVER DISCOVERY 3 LR3 & COMPATIBLE WITH DISCOVERY 4 LR4 WITH AIR RIDE SUSPENSION, PART # LRNJ MOTORWORKS#7

• LRNJ MOTORWORKS ALUMINUM HEAVY-DUTY AIR SUSPENSION LIFT KIT +1.5 INCHES PLUS TO STOCK LEVEL – COMPLETE VEHICLE SET COMPATIBLE WITH LAND ROVER DISCOVERY 3 / LR3 2005-2009 & COMPATIBLE WITH DISCOVERY 4 / LR4 2010-2016 FOR MODELS EQUIPPED WITH AIR SUSPENSION, PART # LRNJ MOTORWORKS#7 *** HEAVY-DUTY PRECISION-ENGINEERED ALUMINUM CORROSION-RESISTANT
• High-quality heavy-duty suspension lift rod kit designed for vehicles equipped with factory air suspension. This kit provides a quick and reliable suspension height increase by adjusting the height sensor reference point, delivering approximately +1.5 inches lift for improved off-road ground clearance and a more aggressive stance.
• Manufactured from durable solid aluminum with corrosion-resistant properties, these upgraded link rods replace factory plastic and rubber components for improved strength, reliability, and long service life. Designed for fast installation with no wiring, coding, or electronic modifications required. Supplied as a complete front and rear vehicle set with installation grease included.
• Compatible with Land Rover Discovery 3 / LR3 2005–2009 (air suspension models only). Compatible with Land Rover Discovery 4 / LR4 2010–2016 (air suspension models only). Compatible with Land Rover Range Rover Sport L320 2005–2013 (air suspension models only).
• Key Features: - Direct replacement height sensor lift rods. - Approximate +1.5 inches suspension lift. - Heavy-duty solid aluminum construction. - Corrosion-resistant weatherproof design. - OE-style end fittings for easy fitment. - No wiring or electronic modifications required. - Fast installation in approximately 15–20 minutes. - Includes installation grease. - Cost-effective alternative to electronic lift modules.
• Technical Specifications: - Product Type: Air suspension lift rod / sensor link kit. - Material: Aluminum alloy with reinforced rubber bushings. - Lift Height: Approx. +1.5 inches. - Finish: Corrosion-resistant aluminum. - Fitment Type: Direct replacement. - Position: Front and rear height sensors.
• Installation Instruction: Tools Needed: - Jack and axle stands. - Wheel chocks. - Flathead screwdriver or trim tool. - Wheel nut socket or spanner. -Gloves & Safety glasses. *** Safety First: - Always work on level ground. - Never rely solely on a jack – use axle stands. - Wear gloves and safety glasses. - Keep hands clear of moving suspension parts. - Do not force suspension components or sensor arms.
• Step 1 – Prepare Vehicle: - Park on level ground. - Apply parking brake. - Chock wheels. - Set suspension to Access Height (lowest setting). - Switch ignition off and remove key. *** Step 2 – Raise Vehicle (Optional): - Jack vehicle safely if extra access is required. - Support with axle stands. - Remove wheels if needed. *** Step 3 – Locate Height Sensor Rods: - Each corner of the vehicle uses a rod connecting: Suspension arm to Height sensor arm. *** Step 4 – Remove Factory Rods: - Carefully pop rod ends off ball joints using screwdriver or trim tool. Do not twist or bend the sensor arm.
• Step 5 – Install New Lift Rods: - Kit Includes - 2 x short rods for front axle and - 2 x long rods for rear axle. - Apply supplied grease if required. - Press rod ends firmly onto ball joints until fully seated. - Ensure rods move freely without binding. *** Step 6 – Repeat for Remaining Corners: - Install one corner at a time. - Keep left and right sides matched equally. *** Step 7 – Lower Vehicle & Check: - Refit wheels if removed. - Lower vehicle carefully. - Start engine. - Allow suspension to self-level. - Drive slowly so system can recalibrate.
• Important Notes: - Incorrect rod fitment may trigger suspension warning messages. - Recheck all rods after first drive. - Vehicle must be on level ground during installation. - Professional installation recommended for best results. *** Legal Notice: This kit modifies suspension sensor reference height. Intended for off-road or show use where permitted. Please ensure compliance with local regulations before installation or use. *** Manufactured and assembled in the USA.