Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Terrarium Heat Mat Heating Pad, Switch Cooling Fan Freezer Fridge ON & Off at Setpoints 10A 1200W

Main Features

• Designed with dual outlets, just plug & play
• Dual relays, able to control both heating and cooling device separately or meanwhile
• Dual waterproof probes, turn device on and off at desired temperature, very easy and flexible to use
• Celsius or Fahrenheit Read-out
• Dual LED display, read temperature from 2 probes
• High and Low Temperature Alarm; Differential Temperature Alarm
• Power-on Delay to protect output device from excessive on/off toggling
• Temperature Calibration
• Settings are retained even when power off

Specification

Temperature Range: -50~99°C / -58~210°F

Temperature Resolution: 0.1 °C / 0.1°F

Temperature Accuracy: ±1°C / ±1°F

Controller Dimension: 210x55x40 mm

Input Power: 85~250VAC, 50/60Hz

Output Power: 85~250VAC, MAX 10A

Buzzer Alarm: High and Low Temperature; Temperature Difference

Sensor Cable: NTC Sensor x 2; 2m/6.56ft

Input Power Cord: 1.35m / 4.5ft

Main Functions:

1. Heating Mode: if ON Temperature < OFF Temperature, it is on Heating Mode, socket1(2) power on when current Temperature <= ON Temperature, power off when current Temperature >= OFF Temperature;
   For example: set socket1 ON Temperature as 20°C, OFF Temperature as 30°C, socket1 will power on when current temperature <= 20°C, and power off when current temperature reaches 30°C.
2. Cooling Mode: if ON Temperature > OFF Temperature, it is on Cooling Mode, socket1(2) power on when current Temperature >= ON Temperature, power off when current Temperature <= OFF Temperature;
   For example: set socket2 ON Temperature as 35°C, OFF Temperature as 25°C, socket2 will power on when current temperature >= 35°C, and power off when current temperature reaches 25°C.