Rx Clear Leak Seal | Fast Acting Repair Kit for Spas and In-Ground Swimming Pools | Formula Stops Leaks Within 24 Hours | 1 Quart Bottles | Single Pack

Rx Clear® Leak Seal is recommended for the repairs of minor leaks and cracks in pools or spas. The fast acting formula usually stops leaks within 24 hours, eliminating the need to empty your pool or spa.

DIRECTIONS FOR USE:

1.  Turn pump off. If available, set the filtration system to “By-Pass” or “Recirculate” to avoid the product from passing through the filtration system when the pump is running. Remove filter grids or cartridge.
2. If the leak location is unknown, add the recommended dosage to the skimmer. If you are sure of the location of the leak, pour the recommended dosage directly into the water at the area of the leak.
3. Where possible, attach a vacuum hose with the vacuum head resting at the deepest end of the pool/spa to allow for optimum effect when the pump is turned back on.
4. After 30 minutes following the application, turn pump on and allow to run for at least 8 hours.
5. Check pool/spa to see if it is still losing water. A second application may be necessary and can be made within the next 24 hours.
6. Replace filter grids or cartridges after 24 hours and resume normal filtration. You can then enter your pool/spa 24 hours after application. 

NOTE: Leak Sealer is not suitable for vinyl pools. This product should not be used when the rate of water loss exceeds 1" per day

Dosage:

• 1 qt. per 15,000 gallons of pool water