Tilta Nucleus-M: Wireless Follow Focus | Lens Control System

Tilta Nucleus-M: Wireless Follow Focus | Lens Control System | WLC-T03
- The Nucleus-M is a wireless 3 Channel system. Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless.
- Each motor has a built-in MDR unit, saving space and setup time.A single motor can be powered directly from the camera's battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.There is no limit on the amount of motors an operator can attach per channel.
- The FIZ hand unit and two handle grips have a wireless range of 1000 feet.The signal from the FIZ hand unit can be upgraded to 1 1/4 miles with an additional accessory.Both hand grips and FIZ hand unit run off (2) 18650 batteries. (Batteries are included.)When fully charged the batteries in the hand grips can last up to 2 days.
- The batteries in the FIZ unit can last up to 10 hours.FIZ hand unit is capable of controlling 3 channels - focus, zoom, and iris as well as overriding the hand grips. 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm.Motors can calibrate on lenses without hard stops - such as photo-lens with follow focus gears.Motors fit standard 15mm and 19mm Rods.Ideal for Gimbal, Drone, and Shoulder-mounted setups.
The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 Â¼ miles! This makes it ideal for drone or car-mounted shots.
The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control.
The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don't have hard end stops at close focus and infinity.
The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses.
To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.
Products include:

(1) Wireless FIZ Hand Unit
(2) Brushless Wireless Motors with 19mm Rod Support and 15mm Rod Bushings
(1) Wireless Handle Left (Focus)
(1) Wireless Handle Right (Iris, Zoom)
(4) Follow Focus marking disks
(1) 7-Pin to 740mm P-TAP Motor Power Cable
(1) 296mm 7-Pin to 7-Pin Straight Motor Connection Cable
(1) 180mm 7-Pin to 7-Pin Straight Motor Connection Cable
(6) 18650 Battery
(1) 18650 4 Slot Battery Charger
(2) Handle to Arri Standard Rosette Adapter
(2) Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)
(1) Wireless FIZ Hand Unit Strap
(1) Hard Shell Waterproof Safety Case

Solemn Commitmentï¼š
1.Our shop are original supply of all goods sold. Absolutely genuine brands!
2.Our shop sold are new products,no second-hand and no defective.
3.Using high precision CNC precision machining process,it's really a nice handle.
4.As soon as your payment has been confirmed,we will handle your order and ship out the items within 1-3 business days.
About Returns:
1.We provide 30 days no reason to return,If you are not satisfied with our products for any reason,you can bring it back.You need pay the shipping cost yourselves.
2.If an item received was damage or defective,after receiving the goods within 3 days,please inform the seller and take photo for it.We will have a full refund of the damaged goods,but buyer must return defective items back to seller.
After-sale Service:
Mechanical parts of our products for 2 years warranty,electronic parts for 1 years warranty.Buyer only need pay the shipping charges during warranty period.
Any questions,please feel free to contact with us.
Country USA
Binding Electronics
Brand Tilta
EAN 0606321810337
IsAdultProduct 0
Label TILTA
Manufacturer TILTA
Model WLC-T03
MPN WLC-T03
PartNumber WLC-T03
Publisher TILTA
Studio TILTA
ReleaseDate 0000-00-00

Country	USA
Binding	Electronics
Brand	Tilta
EAN	0606321810337
IsAdultProduct	0
Label	TILTA
Manufacturer	TILTA
Model	WLC-T03
MPN	WLC-T03
PartNumber	WLC-T03
Publisher	TILTA
Studio	TILTA
ReleaseDate	0000-00-00

Tilta Nucleus-M: Wireless Follow Focus | Lens Control System | WLC-T03

You might also like...