Tools - Brake - Brake Bleeder - Single Person 1-Way Valve

Tools - Brake - Brake Bleeder - Single Person 1-Way Valve
- Have peace of mind with clean brakes
- One way Check Valve
- Ships from Kansas City, MO
1x - Hydraulic Brake Bleeder
One Way Check Valve

Stats:
Dimensions: Multiple, please see photo(s)
Check Valve: CNCÂ BilletÂ Aluminum

Clean and prepare the brake system to prevent additional fluid contamination prior to starting your brake bleeding process. Remove the brake master cylinder cap. Before beginning it is necessary to prime the tool. Position the tool vertically, open the bleeder screw nipple, and begin to depress the lever/pedal, making sure to close the bleeder screw when pressure is not applied. Repeat until brake fluid is seen in the outlet hose. Place the outlet hose into a brake fluid catch can. Open the bleeder valve approximately one-half turn. Depress and release the brake pedal or lever several times to bleed air out of the brake system. Replenish the reservoir with clean brake fluid as needed. Repeat this procedure until all air has been removed from the brake system (no air bubbles appear in the inlet hose. after no bubbles are seen, we recommend closing up the system and moving the bike to allow trapped air bubbles to reposition. Double check the system with the bleeding process until no bubles are seen. Tighten the bleeder valve to the vehicle manufacturer's torque specification (Do not over torque). Set brake fluid level to the vehicle manufacturer's specification. Clean and re-install the master cylinder cap. Do a complete brake function check prior to driving the vehicle on the road.
NOTE 1: If the brake fluid level in the master cylinder becomes too low while bleeding the system, air could be introduced into the system.
NOTE 2: Sometimes brake fluid leakage or air introduction may occur at the threads of the bleeder valve. To avoid these problems, simply unscrew the bleeder valve and seal the thread using Teflon tape. Re-assemble the bleeder valve.

Country	USA
Brand	LuckyBike
EAN	0029882840757
Label	LuckyBike
Manufacturer	LuckyBike
ManufacturerPartsWarrantyDescription	Parts
MPN	500-801
PartNumber	500-801
Publisher	LuckyBike
Studio	LuckyBike
Warranty	30 days manufacturer's defects only
ReleaseDate	0000-00-00

Tools - Brake - Brake Bleeder - Single Person 1-Way Valve

Customers who purchased this also purchased....