U.S. Solid 1/2" Brass 24V AC Electric Solenoid Valve Normally Open Air Non-potable Water NBR

U. S. Solid Normally Open Electric Solenoid Valve;

1/2"ports, brass body, nitrile rubber (NBR) seal, 24 volt AC, for air, water, or fuel

U. S. Solid normally open (N/O) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-half inch (1/2") female threaded (NPT) connections, and nitrile rubber (NBR)gasket.

The coil uses alternating current and energizes at 24 volts AC. Voltage range + or - 10%. 18 Watt power rating.

Semi-direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.

1/2" (16 mm) flow aperture permits a unidirectional flow capacity of 4.8 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (4.8 Cv).

Operational temperature range is 23 to 176 degrees Fahrenheit; -5 to +80 degrees Celsius. Suitable for outdoor use; not for use underwater.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Manufactured in China. Model: USS2-00079. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.