This system has been a long time coming for the GTO/Holden owners. We would like to thank all the GTO forum members who tested and ran our prototype mules for the last few months as we gathered data from their vehicles!
We would also like to thank them for being so patient. We test, re-test and test again to find every possible amount of power while reaching our mileage goals of 12,000 miles without issue.
We set our design target to support 800hp/ 500 cu inch and 7000+RPM, all while keeping the system easy to install and making it a "TRUE" cold air system that breathes better when the hood is "CLOSED" vs. Open on a dyno. (More on this below)
We accomplished this goal through intensive on road and track testing which revealed the shortcomings of every other aftermarket system we tested from US and Australian manufacturers.
They "ALL" suffered from heat soak- the Holden /GTO has a sealed engine compartment. This allows very little air in or out, so these cars run HOT naturally, let alone if the motor is built or supercharged! (Creating more heat, remember, horsepower is heat!)
We tested kits that used many configurations, some went over the radiator some to the fender and others sealed to the hood, ALL of them heat soaked the mass airflow meter and air box assembly.
This in turn caused the ECU to pull timing out of the motor and this also forces the tuner to detune for the street or track VS the dyno with the hood open and a fan blowing.
THE VR remedy- At VR we only design our products for the "REAL WORLD" not a static test, because U don't win races standing still on a Dyno
We guarantee that you will get 3 tenths or 3mph through the ¼ mile and or 2 tenths or 2mph "OVER" any other system on the market or we will take the system back and pay shipping both ways!!