WHDZ Auto Paintless Dent Repair Tools T Bar Silde Hammer with 4 Pcs Aluminum Glue Puller Tabs for Car Body Hail Damage Repair Kit
This item may be available in a different size, colour, scent, version or platform:
WHDZ Auto Paintless Dent Repair Tools T Bar Silde Hammer with 4 Pcs Aluminum Glue Puller Tabs for Car Body Hail Damage Repair Kit
This PDR slide hammer works with all dent pulling tabs and is made with ergonomic grips for maximum pulling power.
Features and Benefits: 1.Aluminum Puller as assistant, for some Larger DENT is which is irregular. 2.Fits All Glue Pulling Tabs 3. By Aluminum Puller can quickly repair auto-body dents. 4.By Aluminum Puller does not damage the original paint. 5.By Tap down has the advantages of simple operation. 6.Different shapes of heads for different dents.It is suitable for the dent of all kinds of flat metal ,such as the surface of automobile metal plate and the washing machine's metal plate.
Introduce: 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.