XIM ELPLP49 V13H010L49 Replacement Projector Lamp Compatible with PowerLite Pro Cinema 9500UB 6500UB 9700UB Home Cinema 8345 EH-TW2800 EH-TW2900 EH-TW3000 EHTW3 EH-TW3600 EH-TW5800

Model Number:V13H010L49N Lamp
Application:Commercial,Engineering,Indoor,Professional,Sailing
Wattage:200W
Type:Bare Lamp with Housing
Average Life (hrs):4000
Place of Origin: Shenzhen, China (Mainland)
Be used in projectors: For Epson Epson Powerlite 6100, 6500, 8100, 8350, Pro Cinema 9100, 9350, 9500,


1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.