mykit Ethernet Cable Toner Tracer Probe Cat5 Cat6 RJ45 Network

mykit Ethernet Cable Toner Tracer Probe Cat5 Cat6 RJ45 Network Port Tester with Storage Zipper Pouch for Internet, Telephone Cables
- CONT - Continuity Checking: Turn the knob to the CONT position (Note: CONT LED will not light up at this time), tests for continuity with fast LED responses indicate cable status, the CONT LED will illuminate if short fault, not if open fault
- TONE - Test Telephone Line Status: Turn the knob to the TONE position (Note: CONT LED will not light up at this time), TONE LED will illuminate green to indicate the phone line is idle, red and green flashing indicates dialing, green indicates on the phone
- SCAN - Network Cable / Phone Line Tracing: easily connects to RJ11 telephone and RJ45 ethernet jacks to tone and trace non-energized wiring, loud speaker is audible in noisy locations, work light for use in dark spaces
- Network - Network Cable / Phone Line Sequence Collation: cable tester function identifies common cable miswires in Cat5 Cat6 twisted pair cabling. RJ45 8 pins network cable sequence: 1-8 or 1-G, RJ11 6 pins telephone cable: 2-7, 4 pins telephone cable: 3-6, 2 pins telephone cable: 4-5
- Package included: 1 x Tone Generator, 1 x Probe, 1 x RJ11 Test Cable, 1 x RJ45 Test Cable, 1 x Alligator Clip Cable, 1 x User Manual, 1 x Carry Pounch. Two DC 9V 6F22 batteries are required (not included)
Why do you need a wire tracker?
Need to trace cat5 cable and coaxial cable? Need to identify and label the network cables of your house? Need to figure out where a jack is terminated? Need to do FiOS repair?

What makes our rj45 tester special?
1; The CAT 6 ethernet cable tester will save tons of time when installing a new house's CAT 6 and audio cables. When you couldn't find one of the cables, the toner helped you isolate it quickly.
2; Racking lines and ensuring that they are wired correctly and that the signal is unbroken. Used the cable tracking system for wiring both the ethernet (cat6) and phone lines for a new office.
Made it easy to hook everything into the patch panel in order.
3; Cable tester and tracker is really handy when you need to not only identify a cable out of a bundle, but at testing cables to ensure they are crimped properly and have no broken wires internally.
4; the volume of the cable finder can be adjustable according to the practical condition.
5; there is a bright led light on the receiver, make the cable trace tool can be used as usual when in the dark environment.
6; The circuit testers can be used to check continuity in circuits, easy and fast to locate the breakpoint without opening the wire's cover

Specification:
Anti-explosion rating: IP 40
Altitude: <2000m (meter)
Distance of emitting signal: ï¼ž3000m
Battery (NOT Include): 6F22/9V
Size: Emitter: 5x2.5x1.2 inches Receiver: 8.1x1.6x1.2 inches

Note:
1. When work in places with loud noise, you can connect a 3.5mm earphone to the headset jack of receiver.
2. Please read the instruction clearly to avoid burning or electric shock before using this item or avoid any incorrect using.
3. Be kindly remind you that this product is NOT support BNC connection.

Package Included:
1 x Emitter
1 x Receiver
1 x RJ11 Cable
1 x Alligator Clip Cable
1 x RJ45 Cable
1 x Case
Country USA
Brand mykit
Manufacturer mykit
Binding Misc.
ItemPartNumber FWT11
Model 10331
Color Blue
UnitCount 1
UPCs 701622102621
EANs 0701622102621
ReleaseDate 0000-00-00

Country	USA
Brand	mykit
Manufacturer	mykit
Binding	Misc.
ItemPartNumber	FWT11
Model	10331
Color	Blue
UnitCount	1
UPCs	701622102621
EANs	0701622102621
ReleaseDate	0000-00-00

mykit Ethernet Cable Toner Tracer Probe Cat5 Cat6 RJ45 Network Port Tester with Storage Zipper Pouch for Internet, Telephone Cables

You might also like...